With
the Cyclus Tools Threader Professional for BSA (1,370" x 24 tpi) you'll
generate optimal concentricity of the bottom bracket's thread. Insert
both sides of the threader simultanly to avoid any canting. The usage of an appropriate cutting oil is necessary.Attention:
letters and marks on the tool refer to the tool itself, not the frame
(e.g. "R" means you have to turn the tool to the right, "L" means turn
to the left!)
CYCLUS TOOLS press ring set SHIMANO BB FSAThese rings are designed to be used with quick release art. 720939 and press spinlde, in order to provide professional, safe and fast working.To apply this tool you will need to use of of the following press spindles:- 7202790 CYCLUS TOOLS snap.in - press spindle Press-Fit SN.90-P- 720318 CYCLUS TOOLS press spindle Press-Fit - generation 2- 720312 CYCLUS TOOLS press spindle Press-Fit - generation 1Fit to bottom brackets with 30mm axle size.
CYCLUS TOOLS snap.in bottom bracket press tool for Pressfit Shimano and FSA.The special feature of this tool is the CYCLUS TOOLS® quick release nut. Based on this, the pressing is much more effective, since the time-consuming screwing on and off of the threaded clamp is eliminated. Simply open the quick-release nut, push it onto the spindle, close it and the inner bearing / bearing cups can be pressed in. Suitable for all CYCLUS TOOLS® press-fit and milling tools.Furthermore, the press ring set for Shimano BB & FSA, consisting of 2 press rings, is included in this article.The continuous trapezoidal thread of the spindle and the effective operation of the quick-release nut allow the use for further press works on the bicycle. Simply re-equip this tool by swapping suitable press-in clamps with the ones provided here.For a functional tool you still need the holder item no. 7202750.
