CYCLUS TOOLS spoke wrench for SHIMANO wheels, 4.3 and 4.4mm.This spoke spanner has a 4.3 mm and a 4.4 mm head, suitable for the nipples of Shimano system wheels. The spoke spanner has a plastic-coated cover for comfortable and slip-free use.Note: when using the spoke spanner, always follow the manufacturer's instructions and use the counterholder (art. no.: 720253) to prevent aero spokes from twisting
CYCLUS TOOLS wrench for holding aerodynamic spokes.This plastic counterholder holds flat spokes in the correct position during centering and prevents twisting of the spoke blade while tentioning.In addition, twisted flat spokes can be aligned correctly.It has six different guides for common aero spokes can be fixed.
CYCLUS TOOLS nipple driver, extra long for high-profile rims.The spoke nipple holder makes it easy to thread nipples into the rim hole during wheel lacing without the spoke nipple falling into the hollow chamber of the rim.
CYCLUS TOOLS spoke measuring ruler? exact determination of spoke lengths in milimeters / inches (Spiechenlange)? bore from 1/8" to 1/4" for measuring length of spokes of different ball sizes? gauge for determination of spoke diameters (Speichendurchmesser)? Additional function: holes for measurement of spoke ball sizes (Kugelmass)
CYCLUS TOOLS spoke wrench for Mavic wheels, 9 and 6mm.This spoke spanner has double head suitable for 7 slotted spoke nipples with 9 mm outer diameter, or 6 slotted nipples with 5.5 mm outer diameter as used in Mavic wheels.The spoke spanner has a plastic-coated cover for comfortable and slip-free use.Note: when using the spoke spanner, always follow the manufacturer's instructions and use the counterholder (art. no.: 720253) to prevent aero spokes from twisting.
CYCLUS TOOLS wheel dishing tool 24" - 29".Use this gauge to center (Dish) wheels.Unscrew the set screw until both measuring surfaces of the gauge rest on the rim flank, then turn in the set screw until the measuring surfaces lift slightly off the rim flank.Next place the gauge on the opposite side of the wheel.You can now easily see the axial symmetry of the wheel and adjust the spoke tension on the appropriate side of the wheel to centre the rim if necessary.
A tool for cutting spokes. Designed with a blade width of 8.6 mm, it can cut even sports cars with a narrow rim width in an assembled state.Also compatible with stainless spokes.
WHEEL ALIGNMENT GAUGESuitable for 18"-28" size wheel. Set the center bolt (A) over hub locknuts with touching rim and fasten lockbolt (B).
Then re-set the gauge on oppsite side of rim to determine whethe the frame is properly aligned.
By controlling the spoke tension, you
can assemble the correct wheel and
diagnose wheel problems. A must have tool to roll out high quality boutique wheel builds.
Dimensions - 185(W)×180(H)×70(D) mm
Weight - 380g
Spoke threading tool set only for No.13/14/15 round spoke.Applicable with stainless steel and steel spokes.It can perform “Easy First Bite” and very easy to make accurate threads.No.13/14/15 die heads are included as standard.* Do not process different sized thread than specified on each spoke.
Spoke threading tool set only for No.13/14/15 round spoke.Applicable with stainless steel and steel spokes.It can perform “Easy First Bite” and very easy to make accurate threads.No.13/14/15 die heads are included as standard.* Do not process different sized thread than specified on each spoke.