To Detach The Cap, Insert Tip Of Sharp Pointed Tool To The Recess Between Cap And Pedal Body (Shown On The Photograph As Red Point), Then Lever Out The Cap Gently.. Please Be Careful Not To Scratch Pedal Or Your Own Body.To Attach The Cap, Adjust Small Protrusion Of The Cap And Recess Of The Body, Then Push Into The Position.
This custom 108mm long wrench is designed to remove the dust cap from BM-7, Sylvan series , and Sylvan Prime series of pedals. To adjust or rebuild the pedals first you'll need to remove the dust cap to gain access to the lock nut and cone. This is exact tool for the job.Weight of a pair ※For PRIME SYLVAN ROAD、PRIME SYLVAN TRACK、PRIME SYLVAN TOURING、SYLVAN ROAD、SYLVAN TRACK、SYLVAN TOURING、SYLVAN STREAM、BM-7
Spike pin for GAUSS42 spike pins for GAUSSTool used 2.5 mm hexagon wrenchnote* Size notation: W = tread width, L = tread front-back widthPlease note that specifications and prices may change or production may be discontinued due to changes in raw materials and markets.
Spike pin for GAMMAHexagon socket head set screw with 35 piecesTool used 2 mm hexagon wrenchnote* Size notation: W = tread width, L = tread front-back widthPlease note that specifications and prices may change or production may be discontinued due to changes in raw materials and markets.
When installing the Ezy or Ezy Superior adapters on your bicycle you need a thin wrench to properly tighten the axle to the crank arm. Failing to properly tighten the axle to the crank arm may result in stripped threads, or an injury. This 15mm box wrench is 3.2mm thick and 165mm long , allowing the maximum grip given the tight clearance.Weight of a pair 75gnote ※ Size：W＝width(mm)、L＝length(mm)Specifications are subject to changed without notice.
When you add a toe clip to your pedal, it unbalances the weight distribution and points your pedal perpendicular to the ground.If you’re using our Sylvan Touring, Stream, BM-7 or one of many other double-sided pedals you now have to attempt to spin your pedals level enough to insert your shoe (while riding) using a flat surface, which can be challenging.The Spin II attaches (with bolts) to the rear of your double-sided pedal to add a flip. After installed simply drag your toe backwards across the part of the pedal pointing up and the Spin II will flip the pedal into the proper horizontal position.