Wheel Tools

"CYCLUS TOOLS spoke wrench for SHIMANO wheels. 4.3 4.4mm"

CYCLUS TOOLS spoke wrench for SHIMANO wheels, 4.3 and 4.4mm.This spoke spanner has a 4.3 mm and a 4.4 mm head, suitable for the nipples of Shimano system wheels. The spoke spanner has a plastic-coated cover for comfortable and slip-free use.Note: when using the spoke spanner, always follow the manufacturer's instructions and use the counterholder (art. no.: 720253) to prevent aero spokes from twisting

₹1,090.00*

"CYCLUS TOOLS WRENCH FOR AERODYNAMIC SPOKES, 6 SIZES, PLASTIC C"

CYCLUS TOOLS wrench for holding aerodynamic spokes.This plastic counterholder holds flat spokes in the correct position during centering and prevents twisting of the spoke blade while tentioning.In addition, twisted flat spokes can be aligned correctly.It has six different guides for common aero spokes can be fixed.

₹900.00*

CYCLUS TOOLS - Additional set for truing stand - with spring and calipers for Fat Bike wheels

₹7,895.00*

CYCLUS TOOLS nipple driver, extra long for high-profile rims - length 130mm

CYCLUS TOOLS nipple driver, extra long for high-profile rims.The spoke nipple holder makes it easy to thread nipples into the rim hole during wheel lacing without the spoke nipple falling into the hollow chamber of the rim.

₹1,725.00*

CYCLUS TOOLS REPLACEMENT PIN FOR NIPPLE DRIVER

CYCLUS TOOLS replacement pin for nipple driver

₹1,200.00*

CYCLUS TOOLS replacement spring for nipple driver 720037, qty 10pcs

CYCLUS TOOLS replacement nipple holding spring for nipple driver tool 720037. Includes 10pcs

Content: 10 Pack (₹249.50* / 1 Pack)

₹2,495.00*

CYCLUS TOOLS Rim Repair Tool, for Pulling Out Dents

CYCLUS TOOLS rim repair tool, for pulling out dents 1. Remove tires and tubes from wheel before using this tool. It may also be necessary to loosen or remove spokes in the damaged area of the wheel. 2. Turn the tool in such a way that the depresson (dent) in the rim to be removed is in line with the spindle.

₹27,000.00*

CYCLUS TOOLS rim repair tool, for pushing out dents

Before using the rim repair tool it may be necessary to loosen or remove individual spokes at the point to be repaired. 1. Place the tool at the location of the height impact to be removed (depression in the rim) between the hub body and the inside of the rim. 2. Now, by turning the spindle with the enclosed toggle, push out on the the depression in the rim.

₹7,060.00*

CYCLUS TOOLS spoke key for nipples, spoke size 2.34 mm - wrench size 3.9 / 4.1 mm

₹1,195.00*

CYCLUS TOOLS SPOKE KEY PLASTIC 3.2 mm

₹495.00*

CYCLUS TOOLS SPOKE KEY PLASTIC 3.4mm

₹595.00*

CYCLUS TOOLS SPOKE KEY PROFL, 3.25 MM

CYCLUS TOOLS Professonal spoke key for 3.25 mmForged metal

₹625.00*

CYCLUS TOOLS SPOKE KEY TOP, STAINLESS STEEL 3.25/3.45MM

CYCLUS TOOLS spoke key stainless steel. Material: Steel, Width across flats 3.25 / 3.4 mm Weight: 40 g

₹1,595.00*

CYCLUS TOOLS spoke key, forged, for various sizes

CYCLUS TOOLS All-in-one forged spoke tool for spoke nipple widths: 3.3 / 3.4 / 3.6 / 4.4 / 5.0 / 5.2 mm

₹390.00*

CYCLUS TOOLS SPOKE NIPPLE DRIVER,ADJUSTABLE PIN LENGTH, TO USE WITH ELECTRIC DRILL

CYCLUS TOOLS spoke nipple driver with adjustable pin length, for use with electric drill.

₹2,875.00*

CYCLUS TOOLS SPOKE RULER, METAL

CYCLUS TOOLS spoke measuring ruler? exact determination of spoke lengths in milimeters / inches (Spiechenlange)? bore from 1/8" to 1/4" for measuring length of spokes of different ball sizes? gauge for determination of spoke diameters (Speichendurchmesser)? Additional function: holes for measurement of spoke ball sizes (Kugelmass)

₹1,900.00*

CYCLUS TOOLS SPOKE WRENCH FOR MAVIC

CYCLUS TOOLS spoke wrench for Mavic wheels, 9 and 6mm.This spoke spanner has double head suitable for 7 slotted spoke nipples with 9 mm outer diameter, or 6 slotted nipples with 5.5 mm outer diameter as used in Mavic wheels.The spoke spanner has a plastic-coated cover for comfortable and slip-free use.Note: when using the spoke spanner, always follow the manufacturer's instructions and use the counterholder (art. no.: 720253) to prevent aero spokes from twisting.

₹1,090.00*

CYCLUS TOOLS THRU AXLE ADAPTER FOR TRUING STAND - UP TO 24MM DIAMETER - PAIR

CYCLUS TOOLS thru axle adapters for truing stands - spare pair.These adapters enable the mounting of wheels with thru axles measuring 12 to 24 mm in diameter in a truing stand with conventionalaxle mounts.

₹3,400.00*

CYCLUS TOOLS WHEEL DISHING TOOL 24"" - 29""

CYCLUS TOOLS wheel dishing tool 24" - 29".Use this gauge to center (Dish) wheels.Unscrew the set screw until both measuring surfaces of the gauge rest on the rim flank, then turn in the set screw until the measuring surfaces lift slightly off the rim flank.Next place the gauge on the opposite side of the wheel.You can now easily see the axial symmetry of the wheel and adjust the spoke tension on the appropriate side of the wheel to centre the rim if necessary.

₹9,595.00*

CYCLUS TOOLS WORKSHOP WHEEL TRUING STAND, FOR WHEEL SIZE UP TO 29"

CYCLUS TOOLS workshop wheel truing stand, for wheel size from 24" up to 29".Professional wheel truing can only be carried out when existing rim side to side deviation, high points and side wall imperfections (dents and flat spots) can be identified.The Cyclus Tools truing stand quickly and easily enables you to do this.1) Clamp the wheel in the stand with the adjustable width arm holders.2) Screw the caliper tips in/out to the start position directly besides or under the wheel rim.3) Rotate the wheel to check lateral and radial deviation.optional accessories: exchange kit for fat bike wheels, incl spring and calipers (art. 720081) plastic protection cap for caliper tips (art. 720945)

₹34,500.00*

Hozan C-216 Spoke Cutter

A tool for cutting spokes. Designed with a blade width of 8.6 mm, it can cut even sports cars with a narrow rim width in an assembled state.Also compatible with stainless spokes.

₹5,995.00*

Hozan C-335 Dishing Gauge, 690mm, Silver

WHEEL ALIGNMENT GAUGESuitable for 18"-28" size wheel. Set the center bolt (A) over hub locknuts with touching rim and fasten lockbolt (B). Then re-set the gauge on oppsite side of rim to determine whethe the frame is properly aligned.

₹13,690.00*

Hozan C-738 Spoke Tension Meter

By controlling the spoke tension, you can assemble the correct wheel and diagnose wheel problems. A must have tool to roll out high quality boutique wheel builds. Dimensions - 185(W)×180(H)×70(D) mm Weight - 380g

₹44,000.00*

Hozan Combination Spoke Wrench

The versatile and economical design fits five sizes of nipples.*Not to be used with aluminum nipples.

₹595.00*

Hozan Spoke Threading Tool (#13G)

Spoke threading tool set only for No.13/14/15 round spoke.Applicable with stainless steel and steel spokes.It can perform “Easy First Bite” and very easy to make accurate threads.No.13/14/15 die heads are included as standard.* Do not process different sized thread than specified on each spoke.

₹28,995.00*

Hozan Spoke Threading Tool C-702-14

₹28,995.00*

Hozan Spoke Threading Tool, Replacement Die Head for 14G spokes(C-707-14)

Electric spoke threading tool only for No.14 round spoke.It can make thread of spokes very easily and quickly with this tool.Applicable with stainless steel and steel spokes.It can perform “Easy First Bite” and very easy to make accurate threads.No.14 die head is included as standard.* Do not process different sized thread than specified on each spoke.

₹17,500.00*

Wheel Tools

Filter products